Netgear EX3920 Setup | AC750 Extender

You must first unbox the extender in order to access the two Netgear units and the most crucial EX3920 manuals. which non-technical consumers could find challenging to comprehend. You can use our chat or contact help if you are someone who is not properly trained to carry out such tasks.

How to set up my Netgear EX3920?

The steps listed below must be followed for the Netgear EX3920 setup:

  • Put the EX3920 AC750 Extender close to the router for your home WiFi.
  • Connect the extender to the power outlet.
  • On your Netgear EX3920, wait for the power light to first turn amber and then solid green.
  • If the power LED is not glowing, press the power on/off button.
  • You must connect your wireless device to the Netgear_ext network after turning on your extender.
  • Once you’ve established a network connection with the Extender, go to

Because the Netgear EX3920 has two units, you must follow the same instructions for the second unit as well. If you still experience problems, you can contact our chat support right away. These are two separate extenders for large households with greater space to cover.

Netgear EX3920 Setup | WPS Method

Use WPS to install your EX3920 extender:

  • Connect the extender near your home router for the EX3920 Setup.
  • Hold off until the power light turns solid/steady green.
  • Push the W.P.S button on the Netgear EX3920 once the extender’s power light turns on.
  • Push the W.P.S button on the router or modem in a matter of seconds.
  • At this point, both your Netgear AC750 and the modem’s green light will begin to flicker.
  • Once the extension has all solid green lights, your extender has successfully connected to your 2.4GHz home wifi network.
  • If your WiFi router supports it, repeat the process to connect the extender to the 5 GHz band.
  • Once all the aforementioned procedures have been carried out, unplug the Netgear EX3920 extender and relocate it between the dead spot and the router for optimum performance.

As previously said, you can use the identical steps to set up and operate a second Netgear EX3920 unit. You can finish the Netgear AC750 EX3920 Wifi Extender Setup in this manner. Use the chat feature to contact our support if you still feel you need assistance.

Installation of the Netgear EX3920 Run Smart Setup

Users may easily reinstall or manage the extender using any of the devices connected to the same unit with the EX3920 Smart Setup. You can modify things like the Wi-Fi password or the Ac750 EX3920 SSID by renaming them.

the Netgear EX3920 Smart setup should be used:

  • Connect any wireless device you have to the Netgear EX3920 Network.
  • The AC750 Extender’s device LED becomes green when it is connected.
  • Launch a web browser, such as Edge, Firefox, Chrome, or Safari.
  • In the browser’s address box, type
  • To log in, click the login button and enter your password and email address.
  • Your device’s screen displays the welcome page once you click Smart setup.
  • When logged in, you can easily manage or reinstall your extender from the Ex3920 dashboard.
  • You can speak with our AC750 EX3920 expert team for further information.

If you follow the above instructions, you can configure your wifi extender in just a few minutes. This procedure is known as web browser smart setup. If you are still having trouble setting up your Netgear EX3920. Call our toll-free number.

Netgear EX3920 extender setup via web browser

How can I set up my web browser to configure my Netgear EX3920 extender?

You can also configure your EX3920 using a web browser, such as Chrome or Safari. This method should only be used if you are unable to complete the WPS setup process or if your router or modem does not have a WPS button. You can install your EX3920 extender by following the instructions provided below.

  • Ensure that EX3920 is powered on and connected in.
  • The extension will remain closer to the router during first installation.
  • Currently on your smartphone the Wireless Manager page.
  • In the Wi-Fi settings, choose the Netgear_ext SSID.
  • Join the same network with your smart device.
  • To finish the setup procedure, go to the Netgear EX3920 configuration page right away.
  • Once you are on the setup page, you might be prompted to establish an account, which you can do quickly and effortlessly.
  • The on-screen instructions are now very simple to follow.

You are advised to contact our experts as soon as there are any problems with your EX3920 WiFi extender. Send us an email to get in contact with our experts.

Steps For Reset Netgear EX3920 Wi-Fi Extender 

Prior to performing a reset on your Netgear EX3920 wifi extender, make sure it is powered on and that the Power LED is solid green.

Reset Netgear EX3920 in these steps:

  • The Netgear EX3920 extender’s left side is where you need to look.
  • There are two buttons there; one is an on/off button and the other is a WPS button.
  • Between the tiny triangles, over the WPS button.
  • You’ll notice a little circle; this is the EX3920’s reset hole.
  • Pick up anything, such as a paper clip or pen.
  • Put that in the Reset hole right away, then press and hold for a few seconds.
  • Remove the object from the hole and watch for the green power light to appear.

You should be able to reset your Netgear EX3920 in under a minute by using the above-discussed techniques. Please remember to keep the extender plugged in while you attempt to reset it. Your extender may have hardware or software if that occurs.


Leave a Reply

Your email address will not be published. Required fields are marked *